全自动数控锯片磨齿机可调速锯片磨齿机修齿机

使用微信扫描二维码分享朋友圈，成交更快更简单！

全自动数控锯片磨齿机可调速锯片磨齿机修齿机

本机是专为硬质合金锯片的磨刃设计的，适应研磨各种质合金锯片，配有可调的环绕型托板，能大限度托住锯片齿部或其他磨件，配定位销，可根据锯片直径大小以及齿数多少，调整到标准位置，滑板可水平回转，能锯片原始的磨刃角度或者将其改变。锯托板上配有回转台，便于调整磨刃的进给角度。回转台配有滑块、心轴、限位螺钉等，操作方便又磨刃至中心的半径。磨头配有±20°旋转结构，能满足斜刃锯齿的研磨。
This machine is specially designed for sharpening hard Alloy saw blade. It is suitable for
All kinds of Alloy saw blade shall be ground with adjustable surrounding type.
The supporting plate can support the tooth part of the saw blade or other grinding parts to the greatest extent.
Equipped with locating pins, it can be adjusted according to the diameter of saw blade and the number of teeth.
Less, adjust to standard position, slide plate can rotate horizontally, can
Ensure the original sharpening angle of the saw blade or change it. Saw
The supporting plate is equipped with a rotary table, which is convenient to adjust the feed angle of the grinding blade.
Degree. The turntable is equipped with slide block, spindle, limit screw, etc.
It is convenient to operate and ensures the radius from the grinding edge to the center. Grinding head matching
It has a 20-degree rotating structure, which can meet the grinding of oblique serrations.
本机是根据圆锯片研磨而设计的自动磨齿机，是我厂专为多片锯、推台锯等而开发的配套设备。

一、 机床的特点

本机结构简单、操作方便、功能、节能、低碳环保、磨齿准确。

二、 技术参数

锯片规格 100-800 mm

推齿距离 0-70mm

拔齿速度 0-55齿/min

砂轮转速 2850r/min

合金砂轮规格 125X32X10mm

砂轮电机功率 550w

拨齿电机功率 120w

电压 220V/50Hz

外形尺寸 800X800X1100mm





1.砂轮电机固定座

固定砂轮电机，左右齿锯片可摆角度（一般为左右5度）



2. 调节锯片距离把手

3. 锯片固定滑板

先将锯片固定滑板安装在工作台面上（前面螺丝锁紧），装锯片时根据锯片孔径大小放不同规格的变径套，锯片不能压得太紧，使锯片能转动。调好锯片的角度，用锯片固定滑板把手锁紧。

4. 用锯片固定滑板锁紧把手

5. 工作台

6. 电箱控制面板

7. 推齿杆

8. 大小齿调节螺丝

9. 进刀十字拖板

十字拖板可控制砂轮电机前后左右移动。
This machine is a self-supporting machine designed according to the grinding of saw blades, and it is a supporting equipment specially developed by me for multiple table saws, etc.
Features of Machine Tools
The utility model has the advantages of simple structure, convenient operation, complete functions, high efficiency, energy saving, low carbon, environmental protection and accurate tooth grinding.
Technical parameter
Saw blade specification
00-800mm
Tooth pushing distance
Gear shifting speed
0-55 teeth /min
Wonderful wheel speed
2350/
Alloy wheel specifications
125x3210m
Li Gong of Alcohol Wheel Motor
550
Gear shifting motor power
120
Voltage
220V/50H
external dimensions
800800X1100
1. The grinding wheel motor is fixed
Fixed grinding wheel motor, saw blades with left and right teeth can swing at an angle (generally 5 degrees left and right)
2 handle for adjusting saw blade distance
3. saw blade fixing slide plate
First, install the saw blade fixing slide plate on the worktable (the flour screw is locked). When installing the blade, the variable diameter saw blades with different specifications cannot be installed according to the size of the saw blade aperture.
4. Fix the sliding plate handle with saw blade
5. Workbench
6. Electric box control panel
7. Push rod
8. adjusting screw for large and small teeth
9. Feed cross carriage
The cross carriage can control the grinding wheel motor to move back and forth, left and right.