GNROPE套环K14

使用微信扫描二维码分享朋友圈，成交更快更简单！

GN ROPE套环K14
你还在为GN ROPE套环K14找不到而纠结吗，那就马上联系我，只要你提供品牌和型号，我们就可以帮你们查找，询价。

泉州为中海油、中石油、中石化、钻探工程公司的用户提供进口配件GN ROPE套环K14，公司能以好的价格和快的交货期将的原厂部件交给客户。直接国外订货、不询价于国内！



K2

K2
HEAVY DUTY STUB-END THIMBLE


K2-B

K2-B
HEAVY DUTY STUB-END THIMBLE REINFORCED


K2-C

K2-C
HIGH STRENGTH THIMBLE


K3

K3
FIBRE-ROPE THIMBLE


K3-B

K3-B
FIBRE-ROPE THIMBLE REINFORCED


K4

K4
EGG SHAPED & ROUND THIMBLE


K5

K5
SOLID THIMBLE


K10

K10
THIMBLE WITH LINK


K11

K11
TUBULAR THIMBLE


K12

K12
TUBULAR THIMBLE WITH LINK


K13

K13
BELLMOUTH THIMBLE


K14

K14
CAST THIMBLE


k17

K17
FORGED ROULETTE THIMBLE


K18

K18


Thimbles are used to protect steel wire rope, fibre rope or synthetic rope
Steel wire rope thimbles: K2, K2-B, K4, and K5
Poly-Fibre rope thimbles: K3, K3-B, K4 and K10
High strength ropes (for example Dyneema): we recommend to use K2, K2-B, K2-C or K5 thimbles
SPM/Mooring rope thimbles: K11, K12, K13, K14, K16 and roll thimbles


INSTRUCTIONS FOR USE
The dimensions of the thimbles must be so that the (wire) rope fits properly into the groove of the thimble. If thimbles are used in combination with wire clamps, please take notice of the right use of the clamp. The first clip must be placed one bridge width from the turned back rope tail or dead end of the rope. The second clip must be placed immediately against the thimble but nevertheless in such a position that the correct tightening of the clip does not damage the outer wires of the wire rope. The following clips should be placed on the wire rope between the first and second clip in such a way that they are separated by at least 1½ times the clip width with a maximum of 3 times the clip-width.



Thimbles



LOADS
There is no specific load, work load, proof load or break load available for thimbles. International recognized standards do not specify loads either. Loads cannot be calculated because of too many variable factors, such as rope diameters, rope stiffness, rope bending radius and behavior. Loads given for type K10 and K12 applies to the master links only!

INSPECTION
Before use, check if the thimble is free from impurities, sharp edges, cracks or other irregularities which may damage the rope and therefore affect the strength or reliability of the rope.

MARKINGS
Regular thimbles K2, K2-B, K3, K3-B, K4, and K5 have no markings. Other thimbles supplied by GN have brand mark and production number.

RETAINING BANDS
On request we can add retaining band on our K2, K2-B, K3, K3-B and K10 thimbles. These retaining bands are to ensure the wire cannot go out of the thimble.

GN ROPE套环K14</a>